Log In
Home
02/03/2016
Offline
Hi,
In the OPC UA document for Aggregates (Part 13). There are two bounding techniques mentioned
1. Interpolated
2. Simple
For Interpolated there is sample data (input and out put is available). But for simple bounding no such reference data available in the document. Can I get some reference data for Simple Bounding?
Regards,
Saurabh
Moderators-Specifications
Moderators-Companion
Moderators-Implementation
Moderators-Certification
Moderators-COM
02/24/2014
Offline
Saurabh,
Simple bounding is simple, no calculation or special processing is required. Just find the previous point, it would be the bound. The actual rules are defined in section 3.1.9 and they all revolve around the case where found bounding value has bad status. There is an example defined in section 5.4.3.2.2 that cover the various cases. Also there are two Aggregates StartingBound (5.4.3.28 & A25) and EndingBound (5.4.3.29 & A26) that provide examples of simple bounding for the start of an interval and then end of an intervale respectivley.
Paul
Paul Hunkar - DSInteroperability
1 Guest(s)
Usage Policy