![sp_Feed](https://opcfoundation.org/wp-content/sp-resources/forum-themes/reboot/images/darkpack/sp_Feed.png)
![sp_PrintTopic](https://opcfoundation.org/wp-content/sp-resources/forum-themes/reboot/images/darkpack/sp_PrintTopic.png)
![sp_TopicIcon](https://opcfoundation.org/wp-content/sp-resources/forum-themes/reboot/images/darkpack/sp_TopicIcon.png)
![Avatar](https://opcfoundation.org/wp-content/uploads/sp-resources/forum-avatars/defaults/userdefault.png)
04/01/2014
![sp_UserOfflineSmall](https://opcfoundation.org/wp-content/sp-resources/forum-themes/reboot/images/darkpack/sp_UserOfflineSmall.png)
I am running HDA compliance test for one of my server. The configuration is set and on executing compliance test, some of the test cases (Insert, Insert/Replace, DeleteAtTime,DeleteRaw) from IOPCHDA_AsyncUpdate and IOPCHDA_SyncUpdate interfaces are failing with error ''Test Case caused access violation in test client'.
I am not able to understand this error. Can you please help what does that error mean.
![Avatar](https://opcfoundation.org/wp-content/uploads/sp-resources/forum-avatars/defaults/guestdefault.png)
Hello Shubhi,
This is definitely not standard behavior. I wonder if your installation is corrupted. Do you have another PC (real or virtual) that you could try? I might suggest downloading the components again just in case they are corrupted:
https://opcfoundation.org/deve.....-tool-ctt/
If the problem persists then let's work together via compliance@opcfoundation.org
![Avatar](https://opcfoundation.org/wp-content/uploads/sp-resources/forum-avatars/defaults/userdefault.png)
04/01/2014
![sp_UserOfflineSmall](https://opcfoundation.org/wp-content/sp-resources/forum-themes/reboot/images/darkpack/sp_UserOfflineSmall.png)
Hi Nathan,
Thanks for your reply.
I have tried uninstalling/installing the Compliance tool again and the behavior is same. I have also tried running compliance test on two three different machines(real PC), but it is getting same error.
I have sent you detailed mail with CTD file attached. I hope that helps in figuring out the issue.
Regards,
Shubhi
1 Guest(s)