09/07/2021
Hi,
I want to go from PLC (OPC UA Client) – Modem with M2M Connection – Server – PC with Wifi with scada (OPC UA Server).
Can someone help me which “Server” Program I could use to receive and send the data?
And does that server need’s to handle OPC UA (Because it’s only a bridge / data highway).
Thanks!
05/30/2017
Conceptually, you are looking for an aggregating server.
You can get off the shelf products like:
https://www.unified-automation…..teway.html
Other vendors have similar products.
05/30/2017
You should start by looking at products which have gone through the certification process:
09/07/2021
Hi Randy,
Thanks for your reaction.
I am just in the research phase of my project, could I also connect from a Siemens TIA Portal Professional Scada Application (OPC UA Server/Client) via M2M (Machine2Machine) Connection direct to a Modem which is connected to a Phoenix AXC 1050 PLC (OPC UA Server/Client).
I am not sure yet which application has to be the server and which one the client, and why, and if this is possible at all.
Thanks in advance!
Joost
09/07/2021
Hi,
I Am working on a project where the OPC UA Server (Phoenix contact AXC 1050 PLC) is connected to a Sierra RV50 router with a M2M Sim-Card (Router 1).
The OPC UA Client is a laptop with TIA Portal WinCC professional on a office-network (Router 2).
So I know that I Should put the IP “opc.tcp://name:Port” of the PLC (OPC UA Server) in the “OPC UA Discovery URL” in TIA Portal Scada (OPC UA Client.)
But this won’t work because the PLC is on another network.
Is it possible, and if so, how could I acces the PLC (Router 2) from my Tia portal SCADA Application in the office (Router 1)?
Hope to receive a reaction.
Thanks a lot in advance!
Joost
1 Guest(s)